PURAFIL NEWS

Purafil Technical Director, Chris Muller, was recently named the recipient of the 2008 Maurice Simpson Technical Editors Award by the Institute of Environmental Sciences and Technology (IEST). Chris was nominated for his comprehensive, technical paper entitled, Comparison of Chemical Filters for the Control of Airborne Molecular Contamination. The paper was published in the 2007 Journal of the IEST, garnering Chris an award traditionally presented to authors of the best technical papers published by the IEST during the preceding year.

PURAFIL EVENTS

Purafil ESD and Kazmier & Associates will be exhibiting at the Kentucky Tennessee Water Professionals Conference, which will be held on July 20-23, 2008 at the at the Knovxille Convention Center in Knoxville, TN. Stop by Purafil ESD's Booth #528 to see our Engineered Solutions for the Water & Wastewater Market!

PURAFIL LITERATURE

White Paper: Corrosion: The Unseen Enemy

Case Study: Purafil Removes Corrosive Emissions at Calpine Geothermal Power Plants

PORTAL LOGIN

USERNAME:
PASSWORD

AIR MONITORING

Purafil’s OnGuard series of real-time, continuous air quality monitors help to solve corrosion problems before severe damage occurs. Place the OnGuard monitor at the outlet of your scrubber to verify clean air or in the room to detect isolated corrosion events. All OnGuard measurements correlate to the Instrumentation, Systems, and Automation Society (ISA) Standard 71.04-1985.

OnGuard® 3000 (OG3) Atmospheric Corrosion Monitor

The OG3 is the first electronic instrument which provides real-time readings of an environment's corrosive reactivity level. The OnGuard also provides real-time temperature and relative humidity readings which affect the rate of corrosion. By using OnGuard, users may take preventive action before corrosion damage leads to costly repairs and production downtime. And because the OnGuard 3000 Monitor correlates with standards set by the Instrumentation Society of America (ISA) for classification of industrial environments, the OnGuard may be used to ensure manufacturers' warranties on electrical equipment.
Purafil OnGuard® Continuous Corrosion Transmitter (CCT) OnGuard® Continuous Corrosion Transmitter (CCT)

Use the OnGuard CCT to measure in real-time the amount of corrosion forming on copper and silver surfaces. The monitor logs cumulative data to detect and measure isolated corrosion-causing events and transmits information to your building management system. All CCT measurements can be related to ISA severity levels and potential effects on equipment reliability.
Purafil OnGuard® 2000 Atmospheric Corrosion Monitor
 OnGuard® 2000 Atmospheric Corrosion Monitor

Use the OnGuard 2000 to continuously measure the real-time effects of corrosion on electronics. Data is shown on a liquid crystal display panel. Network a single OnGuard 2000 to monitor multiple rooms or facilities. Adjust the monitor's readings to reflect typical corrosion levels in your industry or application.
Purafil OnGuard® Å-Prompt Outlet Air Monitor
OnGuard® Å-Prompt Outlet Air Monitor (Å-Prompt)

Use the A-Prompt to measure the cleanliness of air discharged from your dry-scrubbing system. The OnGuard 2000 scans the Å-Prompt for cumulative corrosion-level readings and immediate verification of system performance.